Volume 28, Issue 3 (Fall 2024)
jwss 2024, 28(3): 147-160 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Kiyani S, Rajaee T, Karamdokht Behbahani M. Numerical Investigation of Hydraulic Parameters of Flow Passing through Multiple SMBF Flumes. jwss 2024; 28 (3) :147-160
URL: http://jstnar.iut.ac.ir/article-1-4429-en.html
URL: http://jstnar.iut.ac.ir/article-1-4429-en.html
Department of Civil Engineering, Faculty of Thechnical and Engineering, Qom University, Qom, Iran. , shivakiyani78@gmail.com
Abstract: (63 Views)
In this research, the hydraulic parameters of flow have been investigated on SMBF flumes in two simple and multiple modes. In this research, Flow3D software was used for the numerical simulation of SMBF flow. The simulations have been performed in three flow rates (5, 15, and 30 liters per second) and three opening rates (0.075, 0.1, and 0.15 meters). The results showed that when multiple SMBF flumes are used instead of simple SMBF flumes, the maximum velocity increased by 12% on average at a flow rate of 5 L/s, 19% at a flow rate of 15 L/s, and 10% at a flow rate of 30 L/s. The energy consumption of multiple SMBF flumes has been reduced on average by 21% at a flow rate of 5 L/s, by 66% at a flow rate of 15 L/s, and by 122% at a flow rate of 30 L/s compared to simple SMBF flumes. Finally, the observations showed that during the productivity of multiple SMBF flumes compared to simple SMBF flumes, the size of eddies has decreased and the number of eddies and the area of flow turbulence have increased.
Type of Study: Research |
Subject:
Ggeneral
Received: 2024/06/15 | Accepted: 2024/08/19 | Published: 2024/10/31
Received: 2024/06/15 | Accepted: 2024/08/19 | Published: 2024/10/31
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
