Journal of Water and Soil Science
علوم آب و خاک
jwss
Agriculture
http://jstnar.iut.ac.ir
0
user
2476-3594
2476-5554
10.47176/jwss
fa
jalali
1384
10
1
gregorian
2006
1
1
9
4
online
1
fulltext
fa
تأثیر رژیمهای آبیاری و تراکم کاشت بر عملکرد، کارآیی مصرف آب و کیفیت دانه سه رقم سویا درکشت تابستانه در شرایط آب و هوائی کرمان
Effects of Irrigation Regimes and Plant Density on Yield , Water Use Efficiency and Seed Quality of Three Soybean Cultivars<i> Glycine max</i> L. as Summer Crop in the Kerman Climate
عمومی
Ggeneral
پژوهشي
Research
این بررسی به منظور تعیین اثر رژیمهای مختلف آبیاری و تراکم کاشت بر میزان عملکرد و کیفیت دانه در سه رقم سویا، طرح اسپلیت فاکتوریل براساس بلوکهای کامل تصادفی، در سه تکرار و به مدت دو سال اجرا گردید. براساس نتایج به دست آمده از این پژوهش، میزان عملکرد دانه و همچنین میزان روغن و پروتئین موجود در دانه، در هر دو سال آزمایش تحت تأثیر سطوح مختلف آبیاری، تراکم کاشت و رقم قرار گرفت. مقادیر حداکثر و حداقل عملکرد دانه در بوته و در واحد سطح به ترتیب در تیمارهای آبیاری I<sub>2</sub> و I<sub>4</sub> به دست آمد. علاوه بر آن، مقادیر حداکثر و حداقل عملکرد دانه در بوته به ترتیب در تراکمهای کاشت D<sub>1</sub> و D<sub>4</sub> و در واحد سطح به ترتیب در تراکمهای کاشت D<sub>3</sub> و D<sub>1</sub> حاصل شد. در بین ارقام نیز، حداکثر عملکرد دانه، هم در بوته و هم واحد سطح، به رقم V<sub>2</sub> و حداقل آن به رقم V<sub>3</sub> تعلق داشت. درصد روغن دانه در تیمارهای I<sub>1</sub>، D<sub>1</sub> و V<sub>2</sub> حداکثر و در تیمارهای I<sub>4</sub>، D<sub>4</sub> و V<sub>3</sub> حداقل بود، در صورتی که درصد پروتئین دانه در تیمارهای I<sub>4</sub>، D<sub>4</sub> و V<sub>1</sub> بیشترین و در تیمارهای I<sub>1</sub>، D<sub>1</sub> و V<sub>3</sub> کمترین میزان بود. بالاترین کارآیی مصرف آب در تیمار آبیاری I<sub>3</sub> و کمترین آن در تیمار آبیاری I<sub>1</sub> حاصل شد. بالاترین کارآیی مصرف آب براساس عملکرد بیولوژیک در رقم V<sub>2</sub> و براساس عملکرد دانه در رقم V<sub>1</sub> به دست آمد، در صورتی که کمترین کارآیی مصرف آب براساس بیولوژیک و دانه به ترتیب به ارقام V<sub>1</sub> و V<sub>3</sub> تعلق داشت. جهت افزایش تولید عملکرد در واحد سطح، اعمال تیمارهای I<sub>2</sub>V<sub>2</sub>D<sub>3</sub> توصیه میشود.
This study was conducted to evaluate the effects of four levels of irrigation (irrigation of plants after I<sub>1</sub> = 40, I<sub>2</sub> =60, I<sub>3</sub> = 80 , and I<sub>4</sub> = 100mm of evaporation from class A pan) and four plant densities(D<sub>1</sub> = 30, D<sub>2</sub> = 40, D<sub>3</sub> = 50 and D<sub>4</sub> = 60 plants/m<sup>2</sup>) on the seed yield and seed quality in three soybean cultivars(V<sub>1</sub>=Hobit, V<sub>2</sub>=Williams and V<sub>3</sub>=Hill) in a split factorial design, based on the completely randomized blocks, with three replication for two years(2001 and 2002). The Irrigation treatments were assigned to the main plots, and the plant densities and cultivars to the sub plots. Results indicated that soybean seed yield was influenced by the different irrigation and plant density levels in the both years. Irrigation levels I<sub>2</sub> produced the highest and I<sub>4</sub> the lowest seed yield. It was also revealed that the plant density D<sub>3</sub> produced the highest and D<sub>1</sub> the lowest seed yields. Among the cultivars under investigation, V<sub>2</sub> produced the highest and V<sub>3</sub> the lowest seed yield . Seed oil and its protein contents both were affected significantly by the irrigation levels, plant densities and cultivars in both years. The plants receiving I<sub>1</sub> treatment had the highest and those having I<sub>4</sub>, the lowest percentages of seed oil. Changes in the plant densities also affected seed oil and protein content. The plant density of D<sub>1</sub> caused the seeds to have the highest oil and lowest protein percentages. However, D<sub>4</sub> decreased oil and increased protein percentages. The highest water use efficiency was obtained from I<sub>3</sub> and that of the lowest value from I<sub>1</sub>. The results also indicated that D<sub>4</sub> had the highest and D<sub>1</sub> the lowest water use efficiencies. Therefore, it could be concluded that the water use efficiency can be increased by increasing the plant density per unit area. The highest efficiency for biological and grain yield belonged to V<sub>2</sub> and V<sub>1</sub> respectively where as the lowest efficiency for those two mentioned characters belonged to V<sub>1</sub> and V<sub>3</sub>, respectively. However, the treatment I<sub>2</sub>V<sub>2</sub>D<sub>2</sub> is recommended for higer the seed yield production per unit area.
ارقام سویا، پروتئین دانه، تراکم کاشت، رژیمهای آبیاری، روغن دانه، عملکرد، کارایی مصرف آب
Soybean cultivars, Seed protein, Plant density, Irrigation regimes, Seed oil, Yield, Water use efficiency.
137
151
http://jstnar.iut.ac.ir/browse.php?a_code=A-10-2-508&slc_lang=fa&sid=1
GH. Khajouei Nejad
غلامرضا خواجوئی نژاد
00031947532846006978
00031947532846006978
Yes
H. Kazemi
حمدالله کاظمی
00031947532846006979
00031947532846006979
No
H. Alyari
هوشنگ آلیاری
00031947532846006980
00031947532846006980
No
A. Javanshir
عزیز جوانشیر
00031947532846006981
00031947532846006981
No
M. J. Arvin
محمد جواد آروین
00031947532846006982
00031947532846006982
No