Volume 5, Issue 3 (fall 2001)                   JWSS 2001, 5(3): 17-31 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Afzalimehr H. Design of Stable Channels with Gravel Beds. JWSS. 2001; 5 (3) :17-31
URL: http://jstnar.iut.ac.ir/article-1-63-en.html
Abstract:   (21149 Views)

Over the past decades, numerous regime formulations, describing channel width, average flow depth and channel slope, have been proposed for gravel-bed rivers. Using the downstream hydraulic geometry measurements from 280 field channels, nine gravel-bed predictive formulations were compared. They are attributed to Bray, Chang, Hey and Thorne, Kellerhals, Neil, Parker and Simons, and Albertson. The comparison showed that the dominant discharge and the median grain size are not sufficient hydraulic variables to predict the channel geometry (width, depth, and especially channel slope). Seeking more complex formulations with the measured parameters, it was not possible to improve the existing formulations significantly without spurious influences of common variables.

 A second database is thus gathered from 19 laboratory-based boundary-layer measurements published in Kironoto and Graf (13) and Song et al. (19). In fact, the boundary-layer theory will respond to a fundamental question: are the existing available variables in literature not sufficient or the methods of their estimations are not appropriate? Based on the present study, the methods of their estimations should be changed. The second database allows proving the usefulness of the Shields parameter for the prediction of average flow depth and channel slope. Hence, using boundary-layer theory for prediction of Shields parameter and stable channel parameters is recommended.

Full-Text [PDF 766 kb]   (2575 Downloads)    
Type of Study: Research | Subject: Ggeneral
Received: 2008/01/9 | Published: 2001/10/15

Add your comments about this article : Your username or Email:

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | JWSS - Isfahan University of Technology

Designed & Developed by : Yektaweb