1. Department of Water Science and engineering, Khuzestan Science and Research Branch, Islamic Azad University (IAU), Ahvaz, Iran. , drmasjedi.2007@yahoo.com
Abstract: (5967 Views)
In this study, the performance of slot in the spur dike was evaluated as a way to reduce the scouring around the installed flat spur dike in a 180 degree bend and the development of scouring in the slotted spur dike was compared with that of the spur dike with no slot. To evaluate the effect of the slot on the development of scouring around it, a flat spur dike made of Plax Glass was installed in a position of 70 degrees from a bend (180 degrees) in the flume bed. After determining the maximum of scouring depth at the tip, to reduce the scouring around the spur dike, two slots with the determined height were placed in 4 different positions in the spur dike. Experiments with 4 different discharges and constant flow depth in clear water conditions were conducted. The results of the experiments showed that the created the slot reduced the scouring depth toward the spur dike. In both slots, the minimum of scouring depth was seen in a model with the closest position of the slot toward tip, and its maximum was seen in a model with the farthest position from the slot.
Type of Study:
Research |
Subject:
Ggeneral Received: 2016/05/24 | Accepted: 2017/12/4 | Published: 2018/11/15