AU - Abedi-Koupai, J. AU - Fatahizadeh, M. AU - Mosaddeghi, M. R. TI - Effect of Pore Water Salinity on Mechanical Properties of Clay Soil PT - JOURNAL ARTICLE TA - JSTNAR JN - JSTNAR VO - 21 VI - 2 IP - 2 4099 - http://jstnar.iut.ac.ir/article-1-2850-en.html 4100 - http://jstnar.iut.ac.ir/article-1-2850-en.pdf SO - JSTNAR 2 ABĀ  - Today, modern irrigation systems are constructed at a very high cost to operate for optimal use of water and soil. Lack of appropriate technical, social and economic studies, caused high maintenance costs of these facilities during operation. Water resources have been polluted due to industrial development, increasing human population and non-compliance with environmental standards. Most of hydraulic structures are built in areas with poor water quality. Furthermore, engineering properties of fine-grained soils, especially the clay soils, depend on factors such as salinity of solute in the pore water. So that any change in salinity of solute leads to change in the physical and mechanical properties of soils, and consequently make damage to hydraulic structure. This study investigated the effect of water salinity on engineering properties of fine-grained soils. For this purpose, NaCl, with 5 different levels (0, 0.1, 0.2, 0.41 and 0.72 mol/L) was added to the soil and the mechanical properties of soil including compaction, shear parameters, Atterberg limits and consolidation parameters were investigated. The results showed that the addition of NaCl had made no significant changes to the maximum dry unit weight and optimum moisture content of the soil, but it reduced cohesion of soil and increased the internal friction angle .Also, Limit Liquid (LL) are decreased, but it had little effect on the Plastic Limit(PL) of soil. CP - IRAN IN - Isfahan University of Technology LG - eng PB - JSTNAR PG - 119 PT - Research YR - 2017